Thread: k&k must go
View Single Post
  #12  
Old 06-16-2019, 06:17 PM
dogdog49's Avatar
dogdog49 dogdog49 is offline
Charter Member
 
Join Date: Feb 2011
Posts: 660
Default

Quote:
Originally Posted by Doug Young View Post
Installing a Trance over a previous K&K install is very likely not to work - the Trance tape does not like the superglue residue from the K&K install. Some people report they can sand down the bridge plate enough to make it work, but it's not a slam dunk. If you're having a luthier doing the work, and he's willing do a lot of sanding, it may work. My attempts have failed. Trance themselves say it is unlikely to work.

It's hard to know what the issue is that you're having, but in general, SBTs are a bit pickier about interactions with the sound system, and therefore may require more EQ work to sound good than an undersaddle. That's going to be true of just about any SBT, K&K, Trance, HFN, Dazzo, etc, etc. Also, the K&K is sensitive to impedance, so if you're plugging into different systems and getting different results, that may be a factor. A solution to this issue is to have your own preamp/DI that you can rely on.

Do you need to have multiple guitars? If you like the way the Taylor works amplified, maybe a 2nd Taylor?
Hi Doug. Do Dazzos have the same problem as Trances with installation where K&K's have been previously installed?
Reply With Quote