Thread: k&k must go
View Single Post
  #7  
Old 06-16-2019, 04:12 PM
Doug Young's Avatar
Doug Young Doug Young is offline
Charter Member
 
Join Date: Apr 2005
Location: Mountain View, CA
Posts: 6,932
Default

Quote:
Originally Posted by SpruceTop View Post
You could try a Trance Amulet M-VT system, as I've done in several guitars. It works well and is quite feedback resistant. Look in my signature guitars and ask away ...
Installing a Trance over a previous K&K install is very likely not to work - the Trance tape does not like the superglue residue from the K&K install. Some people report they can sand down the bridge plate enough to make it work, but it's not a slam dunk. If you're having a luthier doing the work, and he's willing do a lot of sanding, it may work. My attempts have failed. Trance themselves say it is unlikely to work.

It's hard to know what the issue is that you're having, but in general, SBTs are a bit pickier about interactions with the sound system, and therefore may require more EQ work to sound good than an undersaddle. That's going to be true of just about any SBT, K&K, Trance, HFN, Dazzo, etc, etc. Also, the K&K is sensitive to impedance, so if you're plugging into different systems and getting different results, that may be a factor. A solution to this issue is to have your own preamp/DI that you can rely on.

Do you need to have multiple guitars? If you like the way the Taylor works amplified, maybe a 2nd Taylor?
__________________
Doug Young
----------------
Music on Pandora
You Tube Channel
website: http://www.dougyoungguitar.com
Fingerstyle Christmas Tunes: A DADGAD Christmas
Hymns Book: Hymns for Fingerstyle Guitar
CDs: Closing Time, Laurel Mill
Pickup tests: http://www.dougyoungguitar.com/pickuptests/

Last edited by Doug Young; 06-16-2019 at 04:17 PM.
Reply With Quote