View Single Post
  #6  
Old 04-03-2019, 03:13 PM
stephenT's Avatar
stephenT stephenT is offline
Charter Member
 
Join Date: Feb 2005
Location: GA & MN
Posts: 4,669
Default

I should have said I was overjoyed with the sound I'm finally getting. I've done the large condenser, OK playing w/ picks, not for flesh and nail.

As to the unusual mic placement, 4031 pointed to the 12th fret or thereabouts, 57a on the body seems pretty logical. I've found I can adjust my seating position to accommodate different guitars. I position about two feet away from the mics.

I'm recording just acoustic guitars w/ this set up. I've been working w/ my Waterloo WL-12 on this particular track.

I've done one test recording, I'll see if the guitar part is consumable, not a keeper by any means, if it is I'll post later tonight.

Thanks Doug,..

getting good picked acoustic sound have never been an issue for me. again, playing w/ fingers only is a completely different animal to record in my experience and talking w/ my engineer buddies, that's been their experience as well.

I'm am using the mics in stereo, it's lovely. 4031 center and the 57a to the right wide is quite nice.

Last edited by stephenT; 04-03-2019 at 03:21 PM.
Reply With Quote