Quote:
Originally Posted by littlesmith
Yes. First 24 hours on room temperature then 15 hours at 60 degrees Celcius. I called the company, he say i should apply all layers and then put the heat on in. I asked if i should heat on every layer, that was not the case so I timed 24 hours starting at the gelling of the last layer (i put 3 layers of this gelcoat on).
The plug has edges on it and a lid with 2 electic ovens will provide the heat for 15 hours.
Those openings are closed when it cures. Those openings are for the corners of an aersospace heating blanket with built in temperature control.
This is a plug so the negative will be upside down, a mold with a guitar shaped hole in it. |
Yes, saw that in the previous thread... I guess I was referring to any sanding, polishing, or such that needs to be done after the gelcoat fully cures.