Hi!! It's been a while...
Couldn't work on the guitar for some months, but I'm back.
Thought I'd share a couple more pictures of the process and ask for some advice.
The body is finished and I scraped the bindings flush. Only need to round the binding edges and soundhole, and sand the entire thing.
Installed some neck bindings as well, added some decoration on the heel, and tuner holes are drilled and reamed.
Still have to close the binding at the end of the fretboard and at the nut. The binding channel was hit at this area and now I have a mahogany gap under the black-white-black strip. What is the best way to fill this kind of gaps? I'm used to fill rosewood small gaps with CA glue and sandust, but this gap is somewhat bigger, and not sure how CA glue will work with mahogany.
