12-23-2014, 03:05 PM
|
Registered User
|
|
Join Date: Jan 2009
Location: Louisville, KY
Posts: 3,934
|
|
As you can see frets were pretty worn out.
Next I straightened the neck with a truss rod with the strings off so I could see which frets are not leveled, where are the gaps and what needs attention. I then protected the fingerboard with some painters tape. I made sure I go all the way to the fret as possible.
I've used 3M mounting double stick tape and 320 sandpaper and taped it to my level/measuring tool. It works really well. I've learned this trick from Dan Erlewine's DVD about repair and maintenance.
__________________
My YouTube Channel
Only a life lived for others is a life worth living." - Albert Einstein
|