[patchmcg]

It's all coming together now!!!


The bowl is ready to be glued to the top. All the holes are cut and/or drilled, label has been printed and glued into place.



Here's a close-up of the label. The gold metallic toner really makes this look like gold foil.



Holes are masked from the inside. Time to glue the top to the bowl.



Visqueen is taped to the gluing board, just in case. Top is in place.



A bead of Hysol 0151 is run along the lining.



Top and bowl are joined and excess glue scraped off. I'll wait 24 hours, then pull the body off the board.