Jake, I can't remember if we discussed this, but the output from the Play Acoustic is two balanced XLR connections. The mic should go into your mic channel and the guitar could go into either of the line inputs on the sub. This will give you independent guitar and mic volume control on the speaker. The XLR to 1/4" adaptor will cause an impedance mismatch and negate any benefit of a balanced signal. You'll need to keep the mic gain on the PA pedal low-ish and the level on the mic channel low to avoid clipping. You'll have two preamp stages in series, which is fine with the right gain staging. There is a mixer control menu, and guitar digital gain setting, in the pedal to help get the levels and gain correct. Have fun!
__________________
"Lift your head and smile at trouble. You'll find happiness someday."
|