Quote:
Originally Posted by Vancebo
James, if you see this. Is it possible to attach two shielded Dazzo wires to your circuit board? This way I could try it out.
|
I am happy to answer questions!
You can attach another pickup to the RING connection by soldering it to the pad labeled R/P1 on the connector board. The shield would solder to the bottom side ground plane. It could be more than one wire, the pad is big enough for 2 or 3 at least. It's easy to do.
However, I'm concerned that the Dazzo mounting would be in about the same location the Ultra Tonic needs to mount, so wouldn't there be a real estate conflict?