View Single Post
  #35  
Old 12-29-2020, 07:33 AM
Tim McKnight's Avatar
Tim McKnight Tim McKnight is offline
AGF Sponsor
 
Join Date: Oct 2005
Location: Morral, Ohio
Posts: 5,929
Default

Seems there is some confusion about how to use the product so here is a brief outline of the steps for proper use:

First, remove all the strings.
Clean FB and bridge surfaces with 0000 steel wool rubbing with the grain direction. (Its OK to rub the steel wool over the top of the frets.)
Vacuum all surfaces and surrounding areas.
Liberally apply conditioner and allow to penetrate and soak in. The longer the better.
After you have allowed the product to penetrate sufficiently, buff all surfaces with clean soft cotton cloth. Todd suggested using an old sock turned inside out.
Install strings and enjoy.

Product can be re-applied after each string change if you think its needed?

*** NOTE *** The steel wool will generate some abrasive dust and it WILL scratch finished surfaces so please be careful. I suggest using a vacuum to remove all trace amounts of the steel wool dust prior to applying the conditioner. Do not wipe the dust off or you could scratch the finish.
__________________
tim...
www.mcknightguitars.com
Reply With Quote