Quote:
Originally Posted by jricc
Neck is straight as an arrow, has a high saddle, straight edge hits at top of saddle, no clearance at 7th fret, no room at the rod for any relief. It's all the way out.
|
Hmmm...
There's a chance that the neck may be 'over set.' The straightedge should ideally run to the top of the bridge or a 1/32 above or below.
I'm curious what the low E action is at the 12th. Factory setting is .090
All this said, I think a skilled luthier would be a wise choice.
Best of luck.