View Single Post
  #16  
Old 01-03-2019, 02:33 PM
jimmy bookout jimmy bookout is offline
Registered User
 
Join Date: Jan 2007
Location: charlotte, n.c.
Posts: 2,094
Default

Quote:
Originally Posted by john bange View Post
you mentioned crossover guitar...usually with a 1 7/8 nut width.

If a tuner set with a bearing at the end of the roller is your choice, make sure your head stock is wide enough at the E strings to allow the tuner plates to both screw down.
My Martin 000c crossover has a peg head that is too narrow at the E strings and one side will not seat as the bearings hit one another. This is not a problem with a plastic roller because a tiny bit can be trimmed off.

just something that happened to me...don't know about the Cordoba

FWIW, my Pavan is a 50mm nut (1.97").
__________________
Voyage Air OM-4
Avian Skylark
Pono 0000-30SP
Neil Gardiner Parlor
Guild GAD D-150
Ramsay Classical
Cordoba C10 (Cedar top)
Eastman Pagelli PG2
Neil Gardiner Concert
Taylor Leo Kottke
Gretsch 6120-1959TV
Pavan TP-30-64

And the ukuleles:
Kanilea K3 Koa Super Concert
Kanilea K1 Walnut Tenor
Mainland Tenor
Willard Wixom Tenor
ALL LEFTIES
Reply With Quote