View Single Post
  #18  
Old 12-24-2018, 09:47 PM
Guitaurman Guitaurman is offline
Registered User
 
Join Date: Mar 2014
Posts: 250
Default

Quote:
Originally Posted by BT55 View Post
You can use an XLR Y cable from the mixers L/R output channels so that if any of the pan controls are set incorrectly the signal to the speakers are not affected.
You can, but why bother with a special cable. If the pan is set wrong you'll know it by the lack of signal, and then just turn the pan knob to straight up or pan to the side that your sending to the Fishstick. It's no different than sending the mixers output to a powered speaker. No need to make it more complicated than it has to be. The Fishman is not stereo so either the left or right output from the mixer will do the job of feeding the amp in the speaker.
Reply With Quote