Thread
:
McKnight LowLander
View Single Post
#
51
02-14-2021, 04:51 AM
j. Kinnaird
AGF Sponsor
Join Date: Sep 2013
Posts: 2,978
Quote:
Originally Posted by
Tim McKnight
It’s a 2” diameter “twist lock” disc and pad. I generally use 40 and 60 grit discs to hog material off. “Hog” another one of those technical terms unlike the 4 footed creatures that ultimately end up beside a couple eggs and toast or used in the manufacture of marshmallows. Ewwwwh!
https://www.harborfreight.com/2-in-d...”+sanding+disc
https://www.harborfreight.com/2-in-4...-pk-60745.html
I use these small drum sanders in another one of my right angle grinders. They are very handy for sanding and shaping brace ends.
https://www.harborfreight.com/sandin...anding+sleeves
Thanks Again Tim
BTW a skosh is an appreciation of a Japanese term meaning a little bit.
I didn’t know that. I always thought that A Skosh was two smidgens.
__________________
Kinnaird Guitars
j. Kinnaird
View Public Profile
Visit j. Kinnaird's homepage!
Find all posts by j. Kinnaird