View Single Post
  #49  
Old 02-13-2021, 09:22 PM
Tim McKnight's Avatar
Tim McKnight Tim McKnight is offline
AGF Sponsor
 
Join Date: Oct 2005
Location: Morral, Ohio
Posts: 5,514
Default

It’s a 2” diameter “twist lock” disc and pad. I generally use 40 and 60 grit discs to hog material off. “Hog” another one of those technical terms unlike the 4 footed creatures that ultimately end up beside a couple eggs and toast or used in the manufacture of marshmallows. Ewwwwh!

https://www.harborfreight.com/2-in-d...;+sanding+disc

https://www.harborfreight.com/2-in-4...-pk-60745.html

I use these small drum sanders in another one of my right angle grinders. They are very handy for sanding and shaping brace ends.
https://www.harborfreight.com/sandin...anding+sleeves
__________________
tim...
www.mcknightguitars.com

Last edited by Tim McKnight; 02-13-2021 at 09:28 PM.
Reply With Quote