The HD-28V has a long drop-in saddle. It looks like a cut-through but, unlike a true cut-through saddle, it sits in a routed ‘pocket’ in the bridge. It isn’t glued-in, it’s drop-in.
A UST isn’t a good solution because it would require a recess equal to the length of the transducer strip to be cut in the bottom of the saddle, which can cause problems in achieving a consistent pressure, and hence a consistent signal, along its length.
__________________
John
Brook ‘Lamorna’ OM (European Spruce/EIR) (2019)
Lowden F-23 (Red Cedar/Claro Walnut) (2017)
Martin D-18 (2012)
Martin HD-28V (2010)
Fender Standard Strat (2017-MIM)
|