View Single Post
  #7  
Old 03-31-2011, 07:53 AM
Points East Points East is offline
Registered User
 
Join Date: Feb 2011
Location: Southold, NY
Posts: 12
Default

My bad. The 82cx doesn't have the stereo or group selection. This should be fairly straightforward. Assuming you connect your guitars to the Line input and your mics to the mic input you need to set the input gain (they have a dark square mark on the dial that should put you in the ballpark), set the channel level (at the bottom of each channel, there's an arrow on the dial here) and set the stereo output (lower right corner). You should have signal out of the stereo connections that can go to your sa220 channel 1 and channel 2. Alternatively, you can plug the 82cx stereo out into the ch 1 and ch 2 returns.

If this doesn't work I would take it back to GC and have them set it up and show you.
__________________
__________________________
2010 Taylor Baritone 6 String
2005 Taylor 754ce 12 String
2005 Ibanez PF15
1981 Takamine F400 12 String

Last edited by Points East; 03-31-2011 at 08:10 AM. Reason: clarification
Reply With Quote