Quote:
Originally Posted by jed1894
If I understand your question correctly——
I did not wrap them. I put them in hole which was straight inline with fret board and pulled them through as tight as possible and then locked them with adjusting screw. When tuned up, the tuners turned about 1/4 turn and they were in tune.
One other thing I did do was tighten the locking screw a little tighter than before. Not so sure there wasn’t a little slippage before. Either the new nut or tighter screws fixed it.
Jed
|
Yep, you understood my question. One thing. You need to loosen the clamp (lock), pull the string straight through, tighten clamp (lock), then tune. Should only be 1/4 wrap or so.
Glad to hear you found a solution.