View Single Post
  #24  
Old 08-26-2017, 07:49 AM
SpruceTop SpruceTop is offline
Charter Member
 
Join Date: Jan 2006
Location: Rochester, New York
Posts: 9,616
Default

Quote:
Originally Posted by Rudy4 View Post
Since Bernunzio often has "blemish" WL necks from the Eastman line available as seconds I'd wonder about what's "under the hood" for the rest of the banjo if they produce so many second quality necks to a retailer.
A reputable manufacturer wouldn't sell their low quality seconds to the public IMHO.
I noticed that the peghead of the used Eastman EBJ-WL1 had some varnish runs off the headstock's top points and down the rear of the headstock a slight distance. This wasn't very nice to see and I wondered what it would have taken the person who did the varnishing at Eastman to have done a better job: Perhaps an extra five seconds of time to get the spray or brush volume adjusted to leave a smoother finish?
__________________
Martin HD-28 Sunburst
Martin D-18
Guild F-212XL STD
Adamas I 2087GT-8
Huss & Dalton TD-R
Taylor 717e
Taylor 618e
Taylor 614ce
Taylor 322ce
Larrivee D-40R Legacy
Larrivee D-40M Legacy
Larrivee C-03R TE Tommy Emmanuel
Emerald X20
Takamine EF360S-TT/TLD-2
Ovation Elite Plus
Yamaha LL-TA TransAcoustic
Republic Duolian/Schatten NR-2
Reply With Quote