Quote:
Originally Posted by keith.rogers
Don't have Ozone 9 but have been using 8 for some time (upgraded from 5). They probably have an "assistant" that lets you target the LUFS you want?
In 8, once I have the mix (either bounced non-lossy or bounced in place in a new alternative often for this "pseudo-master"), I just use that and pick the -14dB LUFS (stream) target in the assistant. You can pick a representative sample while it tries to establish stuff and then bounce and measure to see if it's Ok, or set it on "Learn" and have it run the entire time the track(s) play, if the piece is short enough and you have the time. That gives you a good level for YT video, too.
I use the tonal balance too if you have that. Just a sanity check if you've spent too many hours with the headphones on...
|
Exactly. It’s pretty neat. Normally I’d mix it, bounce it, and set up a mastering session with a Pultec plugin and something like Fabfilter Pro-L to get it to -14 Lufs but all I had on my laptop was the new Izotope, so I used this as a chance to take it for a spin. Very slick!