Routed the headstock binding channel :
Glueing the side strips :
Fretted the fingerboard off the guitar. Its a bit unconventional, but my supplyer only had a fingerboard that was not wide enough, i had to add bindings. This way i could file the bottoms of the frets that stick out in 1 line, so the frets feet are not visible from the side. The neck was super flat and the bottom of the fretboards as well, so there should be no problems. I have thought of a better method for the next guitar.
Gluing the fingerboard on (the wooden strips are pushing the bindings inward, i am glugin the fingerboard and bindings in 1 go) :