Hi,
I've got a Genz Benz Shen 150LT and on the back there is a choice of 'Pre EQ' DI for each of the 2 channels separately, or a combined 1&2 channels 'Post EQ'.
The manual for the 150LT states:
Quote:
|
Separate Channel 1 and Channel 2 outputs are post channel volume/pre EQ/pre effects (to take advantage of the dual inputs on each channel) while the Channel 1+2 output is post master volume/post eq/post effects to aid in sending a “finished” mixed signal to a PA system or external power amplifier
|
I'm wondering whether this is a 'typo' as for me the Master volume never affects the volume sent to the DI/Mixing desk but the Channel Gain ALWAYS affects the volume sent to DI/Mixing desk whether pre or post.
I was hoping to have had a 'Thru' type of DI - and this works for me by adjusting my 'monitor' volume with the Master Vol knob which doesn't affect the volume sent to the Mixer. Just wondering why the manual says the 1&2 combined are post Master when that's not the case for me.......
Has anyone else noticed this on their GB amp?
Thanks for your thoughts!