Quote:
Originally Posted by Vindellama
Studio one
|
Ok so in Studio One you would use a BUS track
If you have not done a parallel FX yet
Then:
You would choose the " Send" option in the Guitar track which creates a BUS track already auto routed and ( the guitar track outputs are still going to the Main outs at 100% unprocessed ).
You set the send level at unity gain or (0 db).... Then on the "stereo" BUS track insert the Pro EQ in the first (top ) insert slot and set it up as in the video. In the second slot of the Bus track you insert the reverb and set it to 100 % you then can reduce the level of the BUS track output to get the desired reverb effect you are after. So what you end up with is both the guitar track 100% unprocessed going to the main outputs and the EQ 'ed reverb track going to the main output as well