Thread: Delay Settings
View Single Post
  #2  
Old 04-06-2011, 08:43 AM
KevWind's Avatar
KevWind KevWind is offline
Charter Member
 
Join Date: Apr 2008
Location: Edge of Wilderness Wyoming
Posts: 14,651
Default

I do not use logic but there should be some delay time, feedback and mix percent, controls all of which can be adjusted to less... But ,Are you putting the Delay on a separate AUX track ? if not try this first. Route the output of the track to the regular main stereo audio mix outputs ( this gives you the dry signal going to the mix) But From the "sends" section of the track you want delay on .. send the audio signal to the new Aux track. set the send volume (if you have that adj.) At (0 db) 0r unity gain... Then just decrease the output volume of the aux track until you like the sound ... What you get this way is both a dry signal and a wet signal going to the mix.... Same with reverb.
__________________
" Peace cannot be kept by force. It can only be achieved by understanding." Albert Einstein
Enjoy the Journey.... Kev...


KevWind at Soundcloud

System :
Avid Carbon interface , PT Ultimate 2021.3 .....Mid 2020 iMac 27" 3.8GHz 8-core i7 10th Gen processor,,128GB 2666MHz DDR4 memory,,2TB SSD storage,,Radeon Pro 5700 XT with 16GB of GDDR6 memory,, on Catalina 10.15.7
Reply With Quote