View Single Post
  #14  
Old 10-06-2020, 11:05 AM
MC5C MC5C is offline
Registered User
 
Join Date: Mar 2016
Location: Tatamagouche Nova Scotia
Posts: 1,049
Default

You could install the Hotrod truss rod with the adjuster at the headstock, use the cut-out provided by the previous owner, or you could fill and patch that cutout and install the Hotrod with the adjuster inside the heel of the neck, and use the original adjuster extension piece under the fretboard extension to adjust it. You only want to adjust the bit between nut and heel, you don't want a longer truss rod than that. It depends on how close to original you want it to look, I would think.
__________________
Brian Evans
1935 Dobro model 25 resonator
1943 Paramount (made by Kay) mandolin
1946 Epiphone Zephyr electric archtop
1957 Hofner Senator archtop
1962 Gibson Melody Maker electric
1963 National Dynamic lap steel
1996 Landola jumbo
1998 Godin Artisan TC electric
1998 Epiphone SG electric
2010 GoldTone PBR-CA resonator
2015 Evans electric archtop
2016 Evans archtop
Reply With Quote