View Single Post
  #1  
Old 01-16-2019, 12:59 PM
GaultierRedon14 GaultierRedon14 is offline
Registered User
 
Join Date: Oct 2014
Posts: 314
Default McKnight Lowlander--Final Pictures!

...and so begins the accumulation of the next sawdust pile in the McKnight Guitars workshop!

Hello AGFers, Tim began just a day or two ago, and I received the first batch of pictures, so I thought I'd get a thread started to share the details of this unique build.
There are a number of McKnight builds in the AGF archives, but I don't believe there's been a build thread of a McKnight Lowlander before, so that'll be something new for you McKnight fans!

So first, what exactly is this Lowlander model? Well, it's shape is based on the general contours of an 000. The Lowlander, however, is larger than an 000 in every dimension, I'd say it's roughly halfway between the size of an 000 and a slope dreadnaught, in fact.

I chose this model because it's body dimensions and 12 fret configuration seem like a perfect size for a modern fingerstyle guitar, but at the same time, it's "vintage" body shape would allow me to give it some matching vintage details that I might not otherwise want to include on a more "modern"-shaped body.

I had the good fortune to visit Tim and Mary on a rainy Tuesday (I think it was a Tuesday, I was so jetlagged, I can't remember) in late August where, after a marathon-length day of talking, tapping, chatting, and other related activities, I made a tentative choice of the woods and model for this guitar. By Thanksgiving, we had pretty much settled on all the details, except a last-minute change of fretwire dimensions.

So on to the details of the Lowlander model:


Body dimensions:
Lower Bout: 15.375"
Waist: 9.265"
Upper Bout: 11.25"
Body Length: 20.25
Depth at the Tail: 4.5" (this is my spec, Tim is willing to adjust body depth to your preference)

Scale length: 25.4"
Nut width: 1 13/16"
Bridge spacing: 2 5/16"


Tonewoods: Pretty much every piece of wood on this guitar was selected first for tone, not appearance--lightweight, unrivaled tap tone, stiffness, low-dampening, etc.

Soundboard: McKnight-certified "Tone King" Grade German Spruce
That's my designation, anyways--selected strictly for stiffness and tap tone--I was able to see it and hear it for myself, as well as directly compare it to other very fine spruce tone wood sets from Tim's diverse and carefully-curated collection. Along with Tim's personal recommendation, it was an obvious choice.







Back/Sides: Brazilian Pernambuco
--Quartersawn, very beautiful, high quality set. Unfortunately, there aren't many sets of this quality-or ANY quality--to be had now, and I'm thrilled to have the opportunity to get an instrument with this prized wood, built by someone of Tim's skill and reputation.






Additional Specs:

Honduran Mahogany neck

Pernambuco body binding with Ebony and African Blackwood purflings

African Blackwood fretboard (originally Pernambuco, but changed later!)

Pernambuco Pyramid bridge

Slotted headstock with Gabon Ebony veneer

Rodgers tuning machines

Florentine cutaway

Luckenbooth soundport

EVO gold jumbo frets with hemispherical fret end treatment

AST Titanium bridge pins
__________________
Instruments:

2015 Doerr "Signature" Trinity--Cedar/ Master Grade Brazilian
2016 Edwinson EPC
2016 Hippner "Torres"--German Spruce/Pernambuco
2019 McKnight Lowlander--German Spruce/Pernambuco

Last edited by GaultierRedon14; 05-22-2019 at 12:59 PM.
Reply With Quote