From what I see on the H4n, there is a common line/phone output jack, so that's what you want to use.
From what I see on the 2i2, you want to set the input to "line", not "instrument". You will want to use a 1/4" TRS or TS connector going into the 2i2 (not an XLR). By using the 1/4" connector into the 2i2 instead of an XLR connector, the 2i2 will know a line level signal is being input and not a microphone level signal.
__________________
Chuck
2012 Carruth 12-fret 000 in Pernambuco and Adi
2010 Poling Sierra in Cuban Mahogany and Lutz
2015 Posch 13-fret 00 in Indian Rosewood and Adi
|