View Single Post
  #30  
Old 03-19-2016, 02:38 PM
OddManOut's Avatar
OddManOut OddManOut is offline
Charter Member
 
Join Date: Feb 2009
Location: Carson City, Nv (Want a jackrabbit? We've got extras!)
Posts: 3,135
Default

Tricky, I know. The key thing is the depth measurements have to be taken along the actual edge length of the side, but marked off from the radius template set along the body length. It took me awhile to get it.

If by "insert" you mean the template or pattern, it simply allows Larry to trace the edge profile which will give the desired radius when the sides are bent. The pattern doesn't serve as a physical guide for the cut itself. The is Larry's good eye and steady hand.
__________________
Martin 00-18G; Eastman 805; Waterloo WL-S; Furch: Green OM-SR; Yellow OOM-CR; Tahoe Guitar Co.: OM (Adi/Hog); 000-12 (Carp/FG Hog); 000-12 (Lutz/Maple); 00-12 (Carp/Sinker Hog); 00-14 (Adi/Ovangkol)

My memory of the Sierra sky
Has been clouded by the savage fire
Feel the glory of the global slam

Last edited by OddManOut; 03-19-2016 at 10:42 PM.
Reply With Quote