View Single Post
Old 03-22-2016, 09:02 PM
OddManOut's Avatar
OddManOut OddManOut is offline
Charter Member
Join Date: Feb 2009
Location: Carson City, Nv (Want a jackrabbit? We've got extras!)
Posts: 3,137
Default Back Brace Trimming

Larry takes the back brace ends down to 0.01 inch and reduces their overall mass.

Marking the ends to show the intersection with the rims.

A fixed offset is added.

The router and height guide are ready.

A tad of power tool action...

...and the brace ends are down to final height.

Now the curved chisel and skilled hands brings the ends into the familiar swept profile.

The brace heights are reduced. The braces will be brought back to a bladed profile.

Martin 00-18G; Eastman 805; Waterloo WL-S; Furch Yellow OOM-CR; Tahoe Guitar Co.: OM (Adi/Hog); 000-12 (Carp/FG Hog); 000-12 (Lutz/Maple); 00-12 (Carp/Sinker Hog); 00-14 (Adi/Ovangkol)

My memory of the Sierra sky
Has been clouded by the savage fire
Feel the glory of the global slam

Last edited by OddManOut; 03-23-2016 at 07:31 AM.
Reply With Quote