Quote:
Originally Posted by matthewpartrick
I think I can figure out the four screws, but I didn't know what I was getting into vis a vis action, relief, alignment in general. Is it just a straight swap-out?
Thanks in advance!
|
Generally, a straight swap.
If you cannot get the action height that you prefer by adjusting the saddle heights, then a shim is in order. Relief is adjusted just like any other guitar with a truss rod.
If you see that alignment is slightly off, loosen the screws and pull the neck in the desired direction - tighten the screws while holding the neck in place.
Turn it up!