You could install the Hotrod truss rod with the adjuster at the headstock, use the cut-out provided by the previous owner, or you could fill and patch that cutout and install the Hotrod with the adjuster inside the heel of the neck, and use the original adjuster extension piece under the fretboard extension to adjust it. You only want to adjust the bit between nut and heel, you don't want a longer truss rod than that. It depends on how close to original you want it to look, I would think.
__________________
Brian Evans
Around 15 archtops, electrics, resonators, a lap steel, a uke, a mandolin, some I made, some I bought, some kinda showed up and wouldn't leave. Tatamagouche Nova Scotia.
|