Truss Rod Insallation
The truss rod is installed.
The router guide is atop the neck.
The truss rod slot is routed along the center of the neck.
The rod is fitted into the slot.
The glue shield-a strip of mahogany, I believe- is fitted atop the rod.
Some rubber gasket compound is laid in the slot. This is insurance against rattles.
The rod is set in place.
Later, the glue shield in glued in place.
__________________
Martin 00-18G; Waterloo WL-S; Furch: V1 OOM-SR, Green G-SR, Blue OM-CM; Tahoe Guitar Co.: OM (Adi/Hog), 000-12 (Carp/FG Mahog), 00-12 (Carp/Sinker Mahog), 00-14 (Adi/Ovangkol);
In the night you hide from the madman
You're longing to be
But it all comes out on the inside
Eventually
Last edited by OddManOut; 04-03-2016 at 10:39 PM.
|