Quote:
Originally Posted by printer2
I have taken many clues from Bruce and his generous documentation he provides for us to follow. I also build off the top without a mold, I used to worry about getting the front and end block parallel to each other. In the last two instruments I found a simple solution to ensure that they are square and parallel. I cut a 2"X2" spruce stud to the inside dimensions between the blocks with a miter saw. I clamp it between the blocks and then glue and clamp the blocks down. When the glue is dry just unclamp and remove the 2"X2". It made gluing the blocks in a no brainer.
|
I actually thought about something like this for the first time just after I posted earlier. I believe I will try it!