After receiving the micro drill bits, although they are able to function as mini files and deepen an existing slot in a piece of bone, I was not able to use them on the actual nut, because the mini vise holding them gets in the way, as it is pretty thick.
I ended up using feeler gauges with 600 grit sand paper (I made sure I used the proper gauge for each string, so that the gauge + the added thickness of the sand paper was spot on - I used a digital caliper for that). Very easy!!!
Turns out this is the easiest way of deepening/adjusting nut slots, without investing in expensive nut files.
__________________
Fender Paramount PM-1 Standard
Epiphone Les Paul Tribute 1960
Last edited by NU9; 10-01-2021 at 03:29 AM.
|