I am using a single path with IR->para EQ now (also plate reverb, a compressor for solo boost, etc.). I put the low and mid notch on top of the two peaks in the IR spectrum (-6dB @ 130 Hz & -3dB @ 236 Hz for my Parlor), set the Q to 5 for both (did not seem to change the sound too much so I chose 50% of the peak 10 you could program), upped the IR to 40% and WOW! Much better than less IR and a 200 Hz low cut.
All of this was at Cuki79's coaching. He must hate me by now as I've been quite the pest.
|