[TonedevilGuitar]

Hey guys, I thought I'd post this new build, its one of our fanciest, with lots of pearl inlays. The harp peg head inlay used a laser engraver to cut pearl lam, while the guitar head and fret board was hand cut pearl, tho I used the laser engraver to raster cut the pocket that gave it a super tight fit. One of the pix shows our design for the super treble tuner pocket, which cuts a recess into the side near the tail and provides blocking for the geared tuners to mount without adding any appendages outside the shape of the body. We thought this was a good design because it also avoids using those dreaded zither keyed tuners.

Click here to see the blog post