View Single Post
  #5  
Old 03-18-2019, 02:11 PM
redir redir is online now
Registered User
 
Join Date: Aug 2011
Location: Mountains of Virginia
Posts: 4,905
Default

It looks like it slipped when he was clamping it up. But if he used a good epoxy then that's probably why it's held together so long. It's probably finished with Nitro. You can test that by removing one of the tuners and checking to see if the finish melts with a lacquer thinner.

Black is very forgiving to touch up. You can fill that with epoxy, level sand and spray with black nitro. Mack off areas you don't want over spray and try to thin the finish to zero, IOW don't spray right over masking tape else you will have a ledge.

FOr the back side you could just fill and spray black too, it would look different but certainly better anyway.
Reply With Quote