My eyes aren't as good as they used to be and can't deem to find my magnifier -
Best I can tell at the moment I'm slightly proud of 5/32 on the High E and 6/32" on the low E. Height of the bridge plate looks to be 14" high and low E on front, back about the same, but harder to tell because of bulge.
Also took a straightedge along the plane of the 8th to 14th frets and the corner of looks to be within a 64th of hitting the top of the bridge plate. Its very close anyway. Seems to indicate the reset is not needed?
The frets on the tongue slope down slightly from those from 1 to 14.
Relief as measured last night was about .006 to .008"
|