Quote:
Originally Posted by hermithollow
You may be able to carefully raise the dent with a wet rag and a wood burning tool or soldering iron. Place the wet rag on the dented area and use the wood burning tool to carefully turn the water to steam where the dent is. Practice on scrap wood first so you will know how your particular set up behaves.
Mohawk makes spray can nitro lacquer in sheens from gloss to semi gloss to satin to matt to "dead flat". For repairing a finish you are usually better off to go "flatter" than what is on there, so you might want to go with Matt or Dead flat.
It will be hard to make a perfect repair, but it should be possible to make it less noticable.
|
Cool idea! I'll see what I can do with it