Quote:
Originally Posted by Tygrys
My fingerboard will be done from Carbon Fibre and I will use a stainless steel frets.
Do I have to invest in a frets press or fret hummer will be good enough ofcourse frets will have done correct radius before instalation.
I know that stainless steel frets are the hardest but I dont want to make any dents because I will use wrong tools.
|
for your project since you're gluing your frets in anyway, you don't need to hammer or press anything in. you will need to make some gluing cauls to hold the frets in place while the epoxy sets. you will need to make sure your fret radii closely matches your fretboard radius.