Quote:
Originally Posted by mirwa
Put the bridge in place with a couple of bridge pins, drill two holes through the bridge and into the top behind say pins 1/2 and 5/6, Mix some epoxy up, smear it under the bridge, bolt the bridge down with small bolts
Leave 24-48hrs for epoxy to dry, string it up keep playing
Steve
|
Yeah, this will do it? Should I prep the splintered area first? And shouldn't I do something about the bridge plate gap as well? (I'd have to buy clamps I think. )
Also wondering about the JLD Bridge Doctor. Only $22 and this would also keep the top bow in check.
Tanks.