Quote:
Originally Posted by Mojotone
Usually you can fix a small area with titebond because there are small wood fibers left on the binding. To do it right you should heat the plastic binding with a heat gun and stretch it back to the waist or it won't hold. It more than likely popped loose from shrinking, so forcing it back under tension (without stretching it) will cause it to come lose again in the near future. Be careful though, some binding is cellulose and will catch fire or the finish can blister if you don't know what you are doing! A pro job of it will look clean.
|
Actually I did pretty much what you describe using Titebond. It held for about 4 months. I noticed recently it is starting to come loose again.