View Single Post
  #3  
Old 08-16-2013, 06:26 AM
guitararmy guitararmy is offline
Registered User
 
Join Date: Jul 2006
Location: The Mountain State
Posts: 3,110
Default

If the truss rod access is at the base of the neck inside the soundhole, facing it and turning it clockwise (toward the high E string) will tighten it and bend the headstock and upper neck back towards the back of the guitar.

If the truss rod access is at the headstock, facing it and turning it clockwise (towards the low E string) will tighten it.
Reply With Quote