Quote:
Originally Posted by Silly Moustache
Hi, just poking my nose in here, being a 12 fret dread nut. The nut width on the D18.28.35 - "S" models were 1 & 7/8" =1.875" which was always the standard for Martin standard scale 12 fret models, until the HD28VS came out with a 1 & 3/4" nut width.
Also the neck profile on the D35-S was a "C" profile, and I believe it was the same neck on all three.
Hope this helps (exit - pursued by a bear).
|
Thanks SM
I measured very close to that nut width 1.875 of course I could be off.
It’s wide... and you are probably correct. It is a c shape.