Quote:
Originally Posted by Guitars44me
Make sure the neck angle is correct! Proper geometry is NOT a given on ANY used instrument. It will sound its best when a straightedge laying centered on the frets just meets the top corner of the bridge. So level with the bottom of the showing part of the saddle.
Paul
|
This works for bridges with a radius that matches the fingerboard, but Current Taylor bridges are flat. I wonder if this one is as well? I know the latest Taylors are setup with the line at the edges of the fingerboard projecting to the top of the bridge. If you measure in the center it will seem overset on a flat bridge.