Oops!
Quote:
Originally Posted by Taylor Ham
This works for bridges with a radius that matches the fingerboard, but Current Taylor bridges are flat. I wonder if this one is as well? I know the latest Taylors are setup with the line at the edges of the fingerboard projecting to the top of the bridge. If you measure in the center it will seem overset on a flat bridge.
|
My bad! It will have the usual flat bridge, so measure at the edges of the FB.
Cheers
Paul
__________________
4 John Kinnaird SS 12c CUSTOMS:
Big Maple/WRC Dread(ish)
Jumbo Spanish Cedar/WRC
Jumbo OLD Brazilian RW/WRC
Big Tunnel 14 RW/Bubinga Dread(ish)
R.T 2 12c sinker RW/Claro
96 422ce bought new!
96 LKSM 12
552ce 12x12
J. Stepick Bari Weissy WRC/Walnut
More
|