Phantom power
Microphones requiring 48V phantom power can be connected to the XLR-socket of channel 2 directly. Factory-provided phantom power is activated but, if required, may be deactivated by an internal jum- per.
In contrary 9V phantom power, if required, can ad- ditionally be activated in channel 1 by an internal jumper.
Please note: For both alterations the device must be opened, therefore only qualified service per- sonnel may carry out the modifications concer- ning the de-/activating of phantom power.
General Note: Use of 48V or 24V phantom power
(Phantom power = remote supply, here: powering an audio device via the connected audio line)
Turn on the phantom power only if the unit connec- ted to an XLR socket is designed to handle it!
In general, suitable units are e.g. condenser micro- phones, active DI-boxes and other special audio devices, whose power supply is drawn from the phantom power. Such devices are also labelled ac- cordingly; please heed the permissible power con- sumption (max.10mA).
High-quality dynamic microphones with a balanced signal need no phantom power, but can handle it anyway.
Other devices, which have not been designed expli- citly for phantom power operation, can suffer from considerable malfunctions and damage may result as well.
Examples of devices that may be damaged by in- correct application of phantom power include:
Low-cost dynamic microphones with a mono jack- plug (unbalanced signal) that were fitted afterwards with an XLR connector.
Audio devices with a balanced XLR output (e.g. DI- boxes, effects devices, instrument preamps with a DI output etc.) which are not protected against phantom power applied to their XLR output. (The DI connectors on AER products are protected against applied phantom power.)
Other audio devices (such as preamps, effects pe- dals etc.) whose unbalanced line output was repla- ced by an XLR socket.
If in doubt please consult the manufacturer of the device you are using.
-
Thank You for the replies I will look at some condenser mics with large a membrane please share your real world experiences.
The rode nt1 looks very 👍🏽
All thats good!
|