Quote:
Originally Posted by Captain Jim
I ordered my X10 with a 24.6" scale, making it a 13 fret to the body. The neck contour seems very similar to the Taylor T5 I have. 1 11/16" nut width, definitely thinner (depth and width) neck than the X7 I have.
Good luck with your incoming X10.
|
Thanks Jim. If you have time, I would very much appreciate your measuring the "reach" on your 13 fret X10. If you can't, I understand. I've attached a picture illustrating the dimension, which is just from the front edge of the nut to the inner most point in the body's waist.
https://photos.app.goo.gl/3Dp7jtB7hhMMxnR8A
May I ask, was there a particular reason to select 24.6"?
Thanks,
John