View Single Post
  #12  
Old 12-27-2018, 12:01 PM
Rodger Knox's Avatar
Rodger Knox Rodger Knox is offline
Charter Member
 
Join Date: Jul 2013
Location: Baltimore, Md.
Posts: 2,376
Default

Quote:
Originally Posted by ruby50 View Post
Nothing new hear, I got all of this off the innerweb. I use a 15' radius beam/bar/stick for backs and a 28' for tops. After 8 guitars in 5 years I find that it works so well I won't go to dishes and go-bar decks. Just as easy to sand with the beam, and only takes a little longer to glue braces against it. If you build a bunch of instruments or you love to make tooling, dishes and decks are probably a good idea.

I use the beam to 1) draw the curve on the braces, 2) shape/sand the curved side of the braces, 3) glue the braces down against, and 4) sand the rim before and after lining is installed. After 8 instruments I still have not changed the sandpaper.

Shaping the rim takes just 3-5 minutes on each the top and back before the linings is installed, and another 3-5 minutes on each after the lining is installed. Can't see that a dish will save any time here at all. Gluing braces one at a time takes a little longer without a go-bar deck, but only building a few guitars, the time is not an issue, and the storage space in the shape is an issue:

https://www.flickr.com/photos/ruby16...7699022686200/

click left and right, text below

Good luck and Merry Christmas

Ed
Me too! One of the few things that hasn't changed since I started nearly 20 years ago.
__________________
Rodger Knox, PE
'56 Gibson J-50
et al
Reply With Quote