View Single Post
  #2  
Old 10-17-2020, 09:50 PM
Brucebubs's Avatar
Brucebubs Brucebubs is online now
Charter Member
 
Join Date: Jan 2013
Location: Eden, Australia
Posts: 14,439
Default

Firstly they are not Gotoh 310's - they are Gotoh 301's.

Looking at the spec drawings of the SG 301's and SGV510's the distance from the center of the string shaft to the center of the locating screw hole are identical (10.5mm) - same washer and nut size too - should be a simple straight swap.



I notice the locating screws are the same length but those supplied with the 510's is just slightly fatter near the top - 2.1mm vs 2.4mm - I'd re-use the ones that came out because you know they already fit.
__________________
Brucebubs

1972 - Takamine D-70
1980 - Morris B-50
2002 - Guild F-412
2009 - Martin Grand J12-40E Special
2011 - Martin JDP 2 #71/71
2014 - Alvarez ABT60 Baritone
2015 - Kittis RBJ-195 Jumbo
2012 - Dan Dubowski#61
2012 - Epiphone EJ-200/N
2012 - Huss & Dalton MJ Custom
2018 - Rickenbacker 4003 Fireglo
2020 - Gibson Custom 1957 SJ-200

Last edited by Brucebubs; 10-17-2020 at 11:50 PM.
Reply With Quote